Asphalt Repairs & Utility Cuts
Compact patched areas, pothole repairs and utility-cut reinstatement. Confirm layer thickness, moisture, pass count and acceptance criteria for each project.
New
YH-YL450 Walk-Behind Vibratory Roller
Regular price
$10,000.00
Ask a question
Share
Couldn't load pickup availability
Description
YH-YL450 Product Details
Return Policies
Pairs well with
COMPACT VIBRATORY ROLLER
YH-YL450 Walk-Behind Vibratory Roller for Narrow-Zone Compaction
A compact walk-behind roller for asphalt, soil, sand and granular materials in restricted work areas.
910 mm Machine Width
200 kg Rated Load
0.1 m³ Bucket Capacity
25° Grade Capability
A 450 mm steel drum, 590 mm overall width and 280 kg operating weight suit localized compaction work. Confirm site access, material conditions and the required finish before choosing a configuration.
COMPACTION FOR PRACTICAL JOBS
A Compact Roller for Narrow Work Zones
The YH-YL450 walk-behind vibratory roller is intended for localized compaction of asphalt, soil, sand and granular materials where a larger roller may not fit.
Paths & Narrow Access Routes
For paths, garden routes, pedestrian areas, small driveways and restricted access lanes, subject to the surface and project requirements.
Trenches & Utility Backfill
Compact suitable soil, sand or granular backfill around drainage and utility works. Verify safe operating clearance and the specified compaction method.
Courtyards & Hardscape Subbase
Useful for small plazas, garden projects, hardscape subbase, small parking areas and access ways beside buildings.
Applications include narrow road shoulders and edges, asphalt patching, paths, driveways, trench backfill and other localized compaction. Results depend on material, moisture, layer thickness and operating passes; confirm project acceptance requirements.
NARROW-ZONE COMPACTION
450 mm Drum. 590 mm Overall Width.
Check the complete route and working clearance for this walk-behind roller before mobilizing to a restricted site.
The steel drum is 450 mm wide; the roller's overall width is 590 mm. These are different measurements. Check access clearance along the complete route, including turns and obstacles.
Key Dimensions & Weights
- Steel Drum Width:
- 450 mm
- Overall Width:
- 590 mm
- Drum Diameter:
- 426 mm
- Net Weight:
- 260 kg
- Operating Weight:
- 280 kg
The drum width is not the machine's overall width. Use 590 mm as the stated overall width when checking access; allow additional clearance for site conditions.
Designed for Localized Compaction
- 450 mm steel drum
- Hydraulic pumps and motors drive the roller
- Automatic centrifugal-clutch vibration
- Walk-behind operation for confined work areas
- Separate net and operating weight figures
Compact dimensions help with localized work, but do not establish performance results for every material or site. Confirm the access route and job requirements.
DRIVE, VIBRATION & POWER
Hydraulic Travel and Automatic Vibration
Hydraulic pumps and motors drive the YH-YL450. Vibration is engaged through an automatic centrifugal-clutch system.
Hydraulic Pump-and-Motor Drive
The hydraulic drive system provides roller travel. The available specifications list a travel speed of 0–4 km/h.
Automatic Centrifugal-Clutch Vibration
The vibration system uses an automatic centrifugal clutch; specified amplitude is 0.5 mm, frequency is 75 Hz and excitation force is 15 kN.
Honda GX160 Gasoline Engine
Standard configuration: air-cooled, four-stroke Honda GX160, 5.5 hp at 3600 rpm. Fuel tank capacity is 3.5 L.
Specifications describe the stated configuration. Verify the exact engine and equipment supplied for your destination and order.
Engine & Emissions Configuration
The standard engine is Honda GX160. Honda GX160 or Briggs & Stratton 5 hp alternatives may be available by request. Confirm the selected engine, destination requirements and documentation before ordering.
Documented optional configurations:
- Standard: Honda GX160 gasoline engine
- Alternative: Honda GX160 by request
- Alternative: Briggs & Stratton 5 hp by request
- Optional configurations listed: GB2 / EPA / EU5
Availability and applicable emissions documentation depend on the exact version and destination. Verify the machine nameplate and supporting documents; these options are not an unconditional certification claim.
YH-YL450 SPECIFICATIONS
YH-YL450 Walk-Behind Vibratory Roller Specifications
| Specification | YH-YL450 |
|---|---|
| Operating Weight | 280 kg |
| Net Weight | 260 kg |
| Steel Drum Width | 450 mm |
| Overall Width | 590 mm |
| Gradeability (listed figure; not a safety guarantee) | 25% (conditions and configuration matter) |
| Excitation Force | 15 kN |
| Travel Speed | 0–4 km/h |
| Drum Diameter | 426 mm |
| Vibration Amplitude | 0.5 mm |
| Vibration Frequency | 75 Hz |
| Standard Engine | Honda GX160, air-cooled 4-stroke gasoline |
| Rated Engine Output | 5.5 hp at 3600 rpm (standard Honda GX160) |
| Fuel Tank Capacity | 3.5 L |
| Water Capacity | 10 L |
| Hydraulic Oil Capacity | 6 L |
| Length (handle folded) | 1650 mm |
| Height (handle upright) | 1350 mm |
| Wooden Crate Dimensions | 900 × 640 × 1110 mm |
| Stacked Steel Packing Dimensions | 900 × 600 × 2050 mm |
| Engine Alternatives | Honda GX160 or Briggs & Stratton 5 hp by request; verify exact configuration |
Figures are configuration-specific. Gradeability is listed as 25% (not 25 degrees) and is not a universal safe operating slope. Length and height refer to different handle positions; packing dimensions refer to named packing forms. Verify packing form, quantity, engine and destination documentation for your order.
IS THE YH-YL450 RIGHT FOR YOUR WORK?
Choose the YH-YL450 If You Need:
- A walk-behind roller for localized compaction in narrow work zones
- Compaction of asphalt patches and utility cuts
- Work on suitable soil, sand or granular materials
- A 450 mm steel drum with 590 mm overall width
- A compact option for paths, driveways and site edges
- A standard Honda GX160 gasoline configuration
Confirm Before Selecting:
- The complete access route and required working clearance
- Material type, moisture and specified layer thickness
- Required pass count and project acceptance criteria
- Engine version and destination documentation
Need Help Choosing?
Tell us:
Your access widthMaterial weightWorking surfaceRequired attachmentCountry of use
Share your material, work area, access constraints and destination so the product configuration and specifications can be checked.
YH-YL450 FAQ & NEXT STEPS
Frequently Asked Questions
What is the drum width and overall width?
The steel drum is 450 mm wide and the roller's overall width is 590 mm. Check the complete route and allow for additional clearance.
What are the net and operating weights?
The listed net weight is 260 kg; the listed operating weight is 280 kg. These are separate figures.
What engine is standard?
The standard configuration lists an air-cooled, four-stroke Honda GX160 gasoline engine rated at 5.5 hp at 3600 rpm. Fuel tank capacity is 3.5 L.
What materials can it compact?
It is intended for asphalt, soil, sand and granular materials in localized compaction work. Suitability and results depend on material, moisture, layer thickness and project requirements.
What are the vibration specifications?
Listed values are 0.5 mm amplitude, 75 Hz frequency and 15 kN excitation force. Vibration uses an automatic centrifugal-clutch system.
What is the travel speed and gradeability?
Listed travel speed is 0–4 km/h and gradeability is 25%. The gradeability figure is not a universal safe-slope guarantee; operating conditions matter.
Are other engines or emissions configurations available?
Honda GX160 or Briggs & Stratton 5 hp alternatives and GB2 / EPA / EU5 optional configurations are listed. Verify availability, exact version, nameplate and destination documents before ordering.
How should I assess expected compaction results?
Confirm material, moisture, layer thickness, pass count and acceptance criteria with the project team. No universal depth or productivity figure is stated here.
Check the YH-YL450 for Your Project
Share the material, work area, access route and destination requirements.
Confirm the selected engine, configuration and applicable documentation before ordering.